Main reason of it:1) The glue viscosity is too weak: you should choose the right glue materials;2) Labeling machine roller pressure is not enough: reason and solution as above;3) Label surface: when selecting label surface, you should consider whether the labeling objects is flat or curved, a large diameter or small diameter, is a single surface or spherical rigid body or compressible deformation,...

The transparent bottles can be rigid glass or plastic ones that can be squeezed easily. The bubble of these objects can be listed below:1) The surface of the bottle is not clean or flat enough. Bottles should be pre-washed and dried. According to the shape of the bottle surface, clamp it by the conveyor belt when labeling.2) Didn’t select appropriate film material based on bottle material: select ...

Adhensive label blister often occur during labelling by end user. Main reson of it is uneven glue coating. The surface of self-adhesive materials is consisted of surface material, adhensive material and bottom paper. Uneven glue coating is caused by technical problem during glue coating.Solution One: Adhensive labeling machine pressure roller poorly designed, the pressure is not enough: The proces...

According to the actual situaiton, adjust the label machine’s left and right position, adjust the label out brush angle or adjust the bottle protecting fence’s left and right position to avoid crooked labels.

Reason and Solution: If label feeding speed is faster than object running speed, reduce label feeding speed. If label out too early, move the measuring electric eye to the right. If pre-out label is too long, decrease pre-out label length. If label rolling speed is not quick enough, increase label rolling speed.

Reason and Solution: If the position of the measuring electric eye is wrong, adjust the measuring electrical eye position. If malfunction of the measuring electric eye, replacement the measuring electric eye. If lable sender is not open, just turn on it. If power not on, turn on power.

The shape of the labelling objects can be very different because of the anti-counterfeiting and unique feature from manufacturers. The feeding, labeling, label wrapping of the labeling machine is closely related with the shape of the objects. Only giving length, width, height (diameter, height) to design or just testing with similar specification machine will not reflect the true state of the clie...

If same type bottles, just replace the corresponding bottle spliting wheel and the guide plate and it will redo the work without production efficiency change. I f not same type bottles, just change the conveyor belt normally. The labeling for different diameter products can be carried out on the same conveyor, but the labeling speed will be lowered.

It may be caused by wrong size of the cup holder and the tube is held in the cup holder. too tightly. The cup holder size judgment: the tube should be fully held in the cup holder, but when sealing the tail, the cup holder should not affect the tube shape’s.natural change

It may be caused by too small heating head. Just replace it with bigger heating head. How to judge the correct size of the heating head: Insert the heating head into the tube, then pull out, it will be fine if you can feel a slight suction when pulling out.

It may be caused by damage at the hole of the filling nozzle. You may fix the hole by taking out the filling nozzle. Grind the surface of it gently with water finish sand paper after fixing the aperture of the nozzle. Or the sealing ring of the filling head is damaged, just replace the sealing ring.

Jam blocked in the filling channels, mainly at the tank inlet or in the filling nozzle, just check and clean it.

At the time of filling large size and insufficient tank feeding which may cause instability of liquid level, please increase the feeding quantity or turn down the ball valve above the filling head, reset the filling time (add more filling time ) to slow down the filling.